25
AVS Rear Window Decal
We are excited to offer our members and general truck enthusiasts an AVS Rear Window Decal! This 30″ banner decal looks great on any Avalanche. Custom colors are available upon request. When paying online, please note color choice in Comments section of transaction. We will try to match your requested color as best we can. There is no guarantee of a perfect match. Show your pride and spread the word!
It’s only $10 for your very own AVS decal!
Application instructions:
1. Clean glass
2. Decide at what area of the glass you are going to put decal, e.g. upper part of window, middle, lower, etc.
3. Measure the ends of the decal paper to the frame of the window. Mine was about 9 1/2 inches from edge of decal to frame of window on both sides.
4. The decal measures 30″ in length
5. Mark the edge of the decal with a piece of tape so you know where you are going to start. Might want to put some sort of carpenter’s tape as a guide lengthwise before proceeding. You could also use the defroster lines as a guide.
6. I recommend not taking the paper backing off yet. Start with the side of the decal that has the extra paper as a helper
7. Unpeel one side of the paper adhesive and place the edge down unto the glass
8. Make sure that the angle that it is going to go down is relatively straight.
9. Unpeel the decal and the paper backing across the window with some sort of squeege
10. Firmly rub the adhesive paper making sure the spaces in-between the letters and corners and without bubbles.

Go to our Gift Shop Check-Out page to purchase your decal.
The AVS Oval Decal can be found here.
Thanks for your support!
Avalanche Style



